:Reflow, IR/hot air :Room air :Paste, 96.5%Sn/3.0%Ag/0.5%Cu Senju Metal Industry, Co., Ltd.&#39s Part Number:M705-221CM5-32-10.5) :Glass epoxy 30mm?60mm?0.8mm thick :0.3mm?0.65mm, 0.3mm?1.2mm :0.25?0.65


Чтобы посмотреть этот PDF файл с форматированием и разметкой, скачайте его и откройте на своем компьютере.
1.
Compatibility with impedance control, shield
The FH41 series is equipped with a GND exclusive terminal
and available for connection with impedance control, shield
FFC.
2.Differential impedance 100
The FH41 series features a terminal design considering
impedance control, and making high speed transmission
possible.
3.Highly reliable connection, tough structure
The FH41 series follows the structure of the proven FH28
series, and achieves:
Reliable connection operation and no unlocking thanks to the
durable structure.
4.One-finger operation of the actuator
Proven (in several other Hirose's connectors!) Flip-Lock
rotating actuator assures reliable mechanical and electrical
connection with FPC, confirming it with a definite tactile feel.
5.Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
Standard reel packaging contains 2,500 connectors.
6.Halogen-free
As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
Space saving (68 pos. shown)
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
deuommended2FbC2Tziukness0.E2±0.0G2mm,2Yold2plsted2uontsut2psds2:YND2plste:tO0.G±0.0Gmm,tin plsteiny;
22
22
22
Tze2operstiny2tempersture2snd2zumidity2rsnye2uovers2tze2non-uonduutiny2uondition2of2instslled2uonneutors2in2storsye,2szipment2or2
Part
Material
Remarks
Ordering information
FH4150S0.5SH
❶❷
❹❺❻
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
:G.4G;
:G.0G;
:0.C2;
:0.C2;
:0.CG;
2.G
CL2No.Numter2of2uontsuts
CDEFY
FH4C-2Je-0.GeH:0G;GJ0-220J-C-0G
CJCE.GC0C4.GICG.9G
FH4C-40e-0.GeH:0G;GJ0-220G-E-0G
24C9.GCI.G20.GI2C.9G
FH4C-G0e-0.GeH:0G;GJ0-2204-0-0G
2924.G22.G2G.GI2H.9G
EJEE.GE0E4.GIEG.9G
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
±0.0G
0.G
±0.0G
2.G
±0.0G
0.E±0.0E2:Lsnd2psttern;
0.E
±0.0E
:Lsnd2psttern;
0.4
0.0E
±0.0G
±0.0G
±0.0G
H.H±0.C
0.HG±0.0G
C.2±0.0G
:Lsnd2psttern;
C.GG±0.0G
H.EG±0.0G
0.2
±0.0
9crMjkMsi
C±0.0G:
9crMjkMsi
0.2G
±0.0E
9crMjkMsi
deuommended2metsl2mssk2tziukness2tO0.C
blesse2overlsp2szield2plste2on2yround2plste.
Note
ezield2sres
Yround2plste
CL2No.Numter2of2uontsuts
FH4C-2Je-0.GeH:0G;GJ0-220J-C-0G
FH4C-40e-0.GeH:0G;GJ0-220G-E-0G
FH4C-G0e-0.GeH:0G;GJ0-2204-0-0G
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
tziukness:μm;tziukness:μm;
1313
1313
0303
1.1.
/66/66
3.11/1
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
Packaging Specification
:e:autside;
Inside;
bsrt2NumterCL2No.Numter2of2uontsuts
LMNbcdeT
FH4C-2Je-0.GeH:0G;GJ0-220J-C-0G
E22J.4C4.2CJ.ECICG.IEI.4EE.4
FH4C-40e-0.GeH:0G;GJ0-220G-E-0G
4440.420.224.E2E2C.I49.44G.4
FH4C-G0e-0.GeH:0G;GJ0-2204-0-0G
4440.420.229.E2J2H.I49.44G.4
GHG2.42H.2EJ.EEIEG.IHC.4GI.4
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
Temperature Profile
dependiny2on2solder2psste2type,2volume2A2tziukness2snd2tosrd2size2A2
tziukness.2Consult2your2solder2psste2snd2equipment2msnufsuturer2for2
brezestinysolderiny
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
FFC insertion procedure.
Connector installed on the board.
Lift up the actuator. Use thumb or index finger
Do not force the actuator to open beyond its fully open
position. Do not use any type of tool to open the actuator.
Fully insert the FFC in the connector parallel to
mounting surface, with the exposed conductive traces
facing down.
Do not forcefully bend the FFC upward. Consult FFC
manufacturer for the
recommended bend radiuses.
Rotate down the actuator until firmly closed. It is
critical that the inserted FFC is not moved and remains
fully inserted.
For connectors with multiple contacts, such as 80 pos.
rotate down the actuator pushing at both ends.
2.FFC removal

Fully open the actuator.
Carefully withdraw the FFC exercising caution not to
deform or damage it.

Be very careful not to apply any force to the connector
directly after inserting FFC.

Otherwise, the connector may become unlocked or
the FFC may break.

In particular, design the FFC layout with care not to
bend it sharply upward in a vertial direction near the
insertion opening.

Fix the FFC when loads are applied to it continuously.
//.Т
Insert the cable straight
and obliquely from
above.
③Ajmsc
0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
How to insert
) at both ends of entrance where the connector is
inserted and the guide walls
interior connector so the cable tabs are properly located.
Avoid “ride on”
Avoid insertion so the cables ride on any guide. Be
sure NOT to close the actuator as the cables ride on
any guide. It may cause conduction failure.
Avoid insertion in diagonal direction.
Do not insert the cable in diagonal direction.
A part of the connector may touches the contacts
resulting in deformation of the contacts.
Insert the cable straight into the connector and hook
the cable tabs with the guide.
After insertion, slightly pull the cables to make sure
the cable tabs are rmly secured. No removal of the
cable means correct insertion.
In the event it is locked as the cables ride on a guide,
absolutely avoid moving the cable. In this case, open
the actuator and re-insert the cable as instructed in “
1.How to insert”
timechips.ru
Отличные рекомендации на рынке, уверенность в качестве поставляемой продукции делают нас
надежными партнерами для наших клиентов.
«ТаймЧипс»
Гарантия качества поставляемой продукции
Широкий ассортимент
Минимальные сроки поставок
Техническая поддержка
Подбор комплектации
Индивидуальный подход
Гибкие цены
Модули, микросхемы, пассивные компоненты,
Xilinx
(ХС),
Altera
EPF
EPM
) и силовая
электроника
это наши ведущие позиции, на поставку которых мы гарантированно дадим Вам
самые
выгодные предложения!
В структуру компании
так же
входит конструкторский отдел, который помогает разработчикам и
конструкторам в решении следующих задач:
Оценка стоимости проекта по компонентам
Подбор оптимального решения при выборе компонента;
Подбор аналогов
Техническая поддержка
Консультации у производителей
Поставка прототипов
Уважением
Чернов
Павел
.
Руководитель
отдела
продаж
ООО
"
ТАЙМЧИПС
"
Официальный
дистрибьютор
Shenzhen
Startek
Electronic
Technology
Ltd
России
USB
Disp
Modules
DIsplays
Serial
Modules
http://www.timechips.ru/

http://lcd-timechips.ru/

Телефон: +7 (812) 309
11 доб. 141
Факс:
+7 (812)
11 доб. 152
Моб. Тел.
+7 (905) 232-
Skype: time.chips5
Электронная почта:

manager
@timechips.ru


Приложенные файлы

  • pdf 7029320
    Размер файла: 2 MB Загрузок: 0

Добавить комментарий